3 November 2015
(Hand)work in progress: day 4
Today I finished the wheel and it work…ed. Unfortunately, the bolts on which I sticked the skateboard wheels resulted too weak as soon as I tried it a few times and they started to bend slightly, impeding any further rotation of the wheel.
For this reason I decided to replace these bolts M8 with a threaded rod M10 which would…
2 November 2015
(Hand)work in progress: day 3
Today I started putting the slates together and the wheel started to take its shape! The job has been easy, but quite boring. The most difficult thing was to find a good driller to screw in all those 80mm wood screws.
It rotates fine and hopefully it will hold the weight of a person, honestly I haven’t had the courage…
1 November 2015
(Hand)work in progress: day 2
On Friday I built the base of the wheel. It took me the whole day, but in the, just 10 minutes before the 3D workshop closing time I screwed in the last bolt which completed the base.
The most difficult part has been surely cutting the aluminum pipes precisely and of the right measure, which by the way still has…
Archives
- April 2022
- June 2021
- May 2020
- April 2020
- March 2020
- April 2019
- July 2018
- April 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- December 2016
- May 2016
- March 2016
- February 2016
- January 2016
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014